Quickly Recalling Channels; Monitoring Trunking Activity - Uniden BCD396T Owner's Manual

3. To quick-store the channel or talk group ID, press
E. Otherwise, press No.
If you enter a frequency then press E, the scanner
stores it in the Qck Save Grp group in a system
called Qck Save Cnv Sys. These are created if they
do not exist. Then, the scanner prompts you to save
other channel settings.
If you enter a talk group ID then press E, the scanner
prompts you to rotate the scroll control to select the
system where you want to store the ID. The ID is
stored into a channel group named Qck Save Grp in
the selected system. Only systems that match the ID
type are shown.
If you pressed No in Step 3, the scanner prompts you
to select the system and the group where you want to
store the frequency or talk group ID.

Quickly Recalling Channels

1. Press Hold to hold on any channel.
2. Press
select the system where the channel is stored.
3. Rotate the scroll control to select the system, then
press E. The scanner prompts you to select the
channel group where the channel is stored.
4. Rotate the scroll control to select the group, then
press E. The scanner prompts you to select a
channel.
5. Rotate the scroll control to select the channel,
then press E to hold on that channel.

Monitoring Trunking Activity

To monitor trunking activity, press Hold then turn the
scroll control to select the control channel frequency
(for a Motorola or EDACS system) or any system
frequency (for an LTR system). Active talk group ID's
appear on the second line of the display.
48
+ Rcl. The scanner prompts you to
Func
Basic Operation