Using The Menu - Uniden BCD396T Owner's Manual

Using the Menu

The scanner's menu lets you select options that let you
set up and use the scanner.
To use the menu, press
scanner. To select a menu item, rotate the scroll control
clockwise or counterclockwise. The currently-selected
menu item is highlighted with a bar on the display. When
the menu item you want to select is highlighted, briefly
press the scroll control to select it. To back up a level,
press
Menu
This table shows the scanner's menu structure. To find
information about a particular menu setting in this
manual, go to the page number shown in parentheses
next to the setting.
Note: Not all of the options shown in this table may
appear at the same time. To view all available options on
any screen, rotate the scroll control.
Menu Item
-- M E N U --
Program System
Srch/CloCall Opt
Search for ...
-- M E N U --
Program System
Srch/CloCall Opt
Search for ...
-- M E N U --
Program System
Srch/CloCall Opt
Search for ...
Using the Menu
. To exit the menu mode, press
Submenu
Select System
New System
Srch/CloCall Opt
Srch/CloCall Opt
Freq Lockouts
Broadcast Screen
CTCSS/DCS Search
Srch/CloCall Opt
Repeater Find
Max Auto Store
Set Delay Time
Set Modulation
Set Attenuator
Set Data Skip
Set Step
Adjust P25 Level
Search for ...
Service Search
Edit Service
Custom Search
Srch/CloCall Opt
Edit Custom
Search and Store
on the left side of the
Menu
Using the Menu
Menu
(51)
(104)
(105)
(92)
(106)
(107)
(108)
(87) (107)
(107)
(108)
(109)
(77)
(91)
(95)
(93)
(94)
(97)
again.
49