TurboChef 30 Use And Care Manual page 51

28-1/2˝ (724 mm)
(minimum/maximum)
48-7/8˝ (1241 mm)
(min/max
)
11˝ (279 mm)
(minimum)
30˝ (762 mm) (minimum)
28-1/2˝ (724 mm)
(minimum/maximum)
25-1/8˝ (638 mm)
(min/max
)
34-3/4˝ (883 mm)
(minimum)
30˝ (762 mm) (minimum)
To obtain proper
fit of the oven into
the cabinets, junction
box must be located
above or below the
oven opening.
Recommended drill
hole location if conduit
box (electrical outlet)
is high.
1˝ (25 mm) (minimum)
Recommended drill
hole location if conduit
box (electrical outlet)
is low.
It is recommended
that your base cabinet
support be installed
flush with the top of your
cabinet face.
To obtain proper
fit of the oven into
the cabinets, junction
box must be located
above or below the
oven opening.
To obtain proper
fit of the oven into
the cabinets, junction
box must be located
above or below the
oven opening.
Recommended drill
hole location if conduit
box (electrical outlet)
is high.
1˝ (25 mm) (minimum)
Recommended drill
hole location if conduit
box (electrical outlet)
is low.
PLEASE NOTE:
Single wall ovens
installed under a
1˝ (25 mm) (minimum) counter require a
low conduit box
(electrical outlet).
To obtain proper
fit of the oven into
the cabinets, junction
box must be located
above or below the
oven opening.
reference
24˝ (610 mm)
(minimum)
A 1/2˝ (13 mm)
corner radius is
suggested for the
2 upper corners.
Base cabinet
support must be
able to support
the oven's weight -
approximately
410 lb. (186 kg)
TurboChef
recommends a
solid base.
24˝ (610 mm) A 1/2˝ (13 mm)
(minimum) corner radius is
suggested for the
2 upper corners.
Base cabinet
support must be
able to support
the oven's weight -
approximately
230 lb. (104 kg)
TurboChef
recommends a
solid base.
5-1/2˝ (140 mm) (minimum)
41