Controls - Speedcook Oven - TurboChef 30 Use And Care Manual

2 the speedcook oven
Controls – speedcook oven
single wall oven & top oven in the double wall Model
The TurboChef Speedcook Oven includes a state-of-the-art interface that provides built-in, on-demand
information, and over 600 preprogrammed cook time and temperature settings. For an overview of the
seven Speedcook modes, see pages 3-4. For a list of all preprogrammed cook settings, see the
"Preprogrammed Cook Settings" document, included with this packet.
Classic style analog set Clock knob
Clock and timer
Use to set the time.
The clock and timer run
1. Press knob to extend.
with advanced electronic
2. Turn knob to set time.
control knobs.
3. Press knob back in
set timer knob
Use to set the timer.
1. Press knob to extend.
2. Turn knob to set timer
3. Press knob back into
Timer does not begin
counting down until
knob is pressed back
in to position.
To turn the oven on, you must select a Speedcook mode. See CookWheel (outer knob).
note:
Cook navigator
Consists of the Cook
Navigator Display and
the Info, Back, Cancel,
and Start keys.
to original position.
info key
Press to display
information on the
Oven Setup (sound,
– up to 60 minutes. units & measurements,
display, and software
original position. updates), Help Topics,
and Oven Tips.
note:
in the middle of a cook
cycle, you will not be able
to access the Info screen.
Cookwheel
tM
tM
(outer knob)
Turn to select a
Speedcook mode,
Self-Clean, or to turn the
oven off.
back key
Press to return to
the previous screen.
Cancel key
Press to terminate
a cook cycle or to return
to the main screen.
When the oven is
Cookwheel
tM
(inner knob)
Turn to navigate through
the options on the Cook
Navigator Screen. Press
knob to select an option,
begin a preheat cycle, or
initiate a cook cycle.
oven light switch
Press to illuminate the
top cook cavity.
start key
Press to select an option,
begin a preheat cycle, or
initiate a cook cycle.