Fleetsync: Alphanumeric 2-Way Paging Function - Kenwood TK-8360E Instruction Manual

FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION

FleetSync is an Alphanumeric 2-way Paging Function and is a protocol owned by JVC KENWOOD
Corporation.
Note: If set up by your dealer, your transceiver may use the MDC-1200 feature in place of
FleetSync. MDC-1200 and FleetSync cannot be operated simultaneously.
S (S
ELCALL ELECTIVE
A Selcall is a voice call to a particular station or to a group of stations.
■ Transmitting
1 Select your desired zone and channel.
2 Press the key programmed as Selcall or Selcall + Status.
3 Press / (if the key assignment list selection is configured as "Enabled") or <B/C> to select
the ID of the station you want to call.
• You can also enter the station ID directly by using the keypad.
4 Press the PTT switch and begin your conversation.
• You can also press
■ Receiving
If enabled by your dealer, an alert tone will sound and the LED will blink when a Selcall has been
received. To respond to the call, press the PTT switch and speak into the microphone.
■ Identification Codes
An ID code is a combination of a 3-digit Fleet number and a 4-digit ID number. Each transceiver
must have its own Fleet and ID number.
Note: The ID range may be limited by programming.
P C
AGING ALL
1 Select your desired zone and channel.
2 Press the key programmed as Paging Call to transmit your PTT List ID, to request a call.
S M
TATUS ESSAGE
Status messages are 2-digit codes ranging from 10 to 99 (80 ~ 99 are reserved for special messages).
A maximum of 15 received messages can be stored in the stack memory of your transceiver and can
be reviewed after reception. The
■ Transmitting
If programmed by your dealer, you can press the Call 1 ~ Call 3 keys to quickly send
preprogrammed status messages. You can also manually send status messages.
1 Select your desired zone and channel.
C )
ALLING
■
to page the ID, rather than talking.
icon appears when a message is stored in the stack memory.
11