Kenwood TK-8360E Instruction Manual page 22

• If there is no channel available on your transceiver for recording, "I am not
available" will be sent to the caller and "MEM FULL" appears on the display.
■ Playback
You can play back a recorded conversation, memo, or message.
1 Press the key programmed as Playback.
• If the last action on your transceiver was to auto record your conversation,
"STORE" will appear on the display, otherwise a recording channel with the time
of the recording will appear.
2 Press / to select the channel you want to play back.
• "AR" represents auto recordings.
• "VM" represents voice memos.
• "RM" represents reply messages.
3 The transceiver will announce the time and channel, then the recording will play back.
• When the entire recording has been played, "END OF MSG" is displayed.
• Press A or # to delete the selected recording. Press and hold A or # to delete all
recorded data.
V G
OICE UIDE
If set up by your dealer, when changing the zone and/or channel/group ID, an audio voice will
announce the new zone and channel number/group ID. Additionally, when changing a function
setting, an audio voice will announce the new setting. (Voice announcements vary by dealer setting.)
18