Table of Contents
Advertisement
FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION
FleetSync is an Alphanumeric 2-way Paging Function, and is a
protocol owned by JVC KENWOOD Corporation.
Note:
◆ This function is available only in analog operation.
SELCALL (SELECTIVE CALLING)
A Selcall is a voice call to a station or group of stations.
■ Transmitting
1 Select your desired zone and channel.
2 Press the key programmed as [Selcall] or [Selcall +
Status] to enter Selcall mode.
3 Press
•
On keypad models, if Manual Dialing is enabled, you can
directly enter the station ID.
4 Press the PTT switch and begin your conversation.
■ Receiving
An alert tone will sound and the transceiver will enter
Selcall mode. The calling station's ID will appear when a
Selcall is received. You can respond to the call by pressing
the PTT switch and speaking into the microphone.
■ Identifi cation Codes
An ID code is a combination of a 3-digit Fleet number and a
4-digit ID number. Each transceiver has its own ID.
•
Enter a Fleet number (100 ~ 349) to make a fl eet call.
•
Enter an ID number (1000 ~ 4999) to make an individual call in
your fl eet.
•
Enter a Group ID (which is programmed in the FPU) to make a
group call.
•
Enter a Fleet number followed by an ID number to make an
individual call in your desired fl eet (Inter-fl eet call).
18
/
to select the station you want to call.
Advertisement
Table of Contents
