Kenwood TK-8360E Instruction Manual page 18

When using an optional scrambler board, you can change the scrambler codes:
1 Press and hold the key programmed as Scrambler for 1 second.
• "CODE" appears on the display, followed by the current scrambler code.
2 Press / (if the key assignment list selection is configured as "Enabled") or <B/C> to select your
desired scrambler code.
3 Press S, , or
• After changing your scrambler code, be sure to inform all of your group members of
the new code so they can also reset their transceivers. The scrambler function will
not work with transceivers set up with different scrambler codes.
M / S
ONITOR QUELCH
You can use the key programmed as Monitor or Squelch Off to listen to weak signals that you cannot
hear during normal operation and to adjust the volume when no signals are present on your selected
channel.
• The icon appears on the display while Monitor or Squelch Off is activated.
Your dealer can program a key with one of four Monitor/Squelch Off functions:
• Monitor: Press to deactivate QT, DQT, DTMF, or FleetSync Signaling. Press again to
return to normal operation.
• Monitor Momentary: Press and hold to deactivate QT, DQT, DTMF, or FleetSync
Signaling. Release to return to normal operation.
• Squelch Off: Press to hear background noise. Press again to return to normal
operation.
• Squelch Off Momentary: Press and hold to hear background noise. Release to return
to normal operation.
■ Squelch Level
If a key has been programmed as Squelch Level, you can readjust your transceiver's squelch
level:
1 Press the key programmed as Squelch Level.
• The icon appears on the display, along with the current squelch level.
2 Press / (if the key assignment list selection is configured as "Enabled") or <B/C> to select
your desired squelch level from 0 to 9.
3 Press S or
K L
EY OCK
Press the key programmed as Key Lock to lock the transceiver front panel and microphone keys.
• When any key is pressed while Key Lock is active, "LOCKED" momentarily appears on
the display.
Press the Key Lock key again to unlock the keys.
14
to store the new setting.
O
FF
to store the new setting.