Backlight; Reset; Connect With Your Mobile Device; Pairing Your Weather Station - Oregon Scientific Weather Home RAR213HGX Manual

NOTE As ice alert is only applicable to channel 1,
to prevent flashing of LED, select other channels on
outdoor sensor.

BACKLIGHT

Press LIGHT to activate backlight for 5 seconds.

RESET

• Open the battery compartment.
• Press RESET to return to the default settings by a
pin or the top of a pen.
• Close the battery door.

CONNECT WITH YOUR MOBILE DEVICE

You can remotely set the
weather station and read the
weather information through
Bluetooth ® v4.0 using your mobile
device with the downloaded
application from the Apple Store.
To quickly find the application,
type 'Weather@Home' as
keyword in the search engine.
Ensure your mobile device is
compatible with iOS 5 or Android
4.3 with Bluetooth ® v4.0
RAR213HGX-Manual-EN-R8.indd 7

PAIRING YOUR WEATHER STATION

First of all, you need to pair
your weather station with your
mobile device. will flash
on the screen of the weather
station while pairing and be on
after successful pairing.
• Press and hold for 2 seconds to enable a pair-
up for the main unit for 30 seconds.
• Press and hold for 2 seconds to disable a pair-up mode.
1. Tap to enter SETTINGS screen.
2. Tap on STATION area.
3. Tap Pair Up. Searching... displays. If you want to
cancel the pairing, tap Cancel.
4. Once the pairing is successful, it will return to
STATION screen.
7
2018/8/15 上午10:24