Table of Contents
Advertisement
Chapter 2: Web Configuration
2. Primary Network
This page allows you to configure the Network Authentication. Here provides several different modes of
wireless security. You will have to enter proper information according to the mode you select.
Fig. 32 Gateway\Wireless\Primary Network
Primary Network: It is used to Enable or Disable the whole Primary Network feature.
Network Name (SSID): By using this you can change the factory default to a name of your choice up to 32
characters long.
Closed Network: This control is used to hide or reveal your network name (SSID) to any remote, wireless
equipped PC in the area that may be scanning WiFi channels to find available WiFi networks. The gateway WiFi
radio frequently transmits a beacon signal which can contain this network name (SSID). If you set Closed
45
Illustrations contained in this document are for representation only.
Advertisement
Table of Contents
