Problems With Express Setup - NEC Express5800/R320a-E4 User Manual

Problems with Express Setup

There is an unused area on the lead of HDD.
Did you install Windows Server 2003?
→
If you installed Windows Server 2003 by Express Setup,
the head 8MB of HDD may be unused area.
It is not a problem in operating the system.
Data on the peripheral HDD was erased during the Express Setup.
Is there any HDD other than the HDD to install OS attached?
→
Detach external HDD(s) and run the Express Setup again.
Cannot configure the details of network adapter.
→
You cannot configure the details of network adapter during setup of NEC Express5800/ft
servers.
You can configure this after the startup of Windows.
Troubleshooting 6-19