Auto Re-Operation Function - LG APNQ100LFT0 Owner's Manual

Auto Re-Operation Function

When power is supplied again after unit oper-
ation has been stopped because of interrup-
tion of power supply due to outage or other
causes, auto re-operation will be performed by
remembering previous setting.
- When power is supplied, outdoor unit opera-
tion will be started within 3 minutes.
1
Auto re-operation function can be estab-
lished/released by manipulating indoor unit
button.
* When initial state, Auto re-operation
function will be set up as standard.
For Releasing Re-Operation Function
Press the on/off, fan speed, high temp and
low temp buttons (4 buttons) simultaneously
for 3 seconds.
The unit will respond with beep and re-opera-
tion function will be removed.
For Setting Re-Operation Function
After function release, Press the on/off, fan
speed, high temp and low temp buttons (4
buttons) simultaneously for 3 seconds.
The unit will respond with beep and re-opera-
tion function will be set.
OPERATING INSTRUCTIONS
17