Table of Contents
Advertisement
Dehumidification Mode
Cooling only
In rainy season or high humidity climate, it is
possible to operate simultaneously dehumidi-
fier and cooling mode to remove humidity ef-
fectively.
|
1
Press
button to turn on the indoor.
c
2
Press
button to select dehumidification
mode
- Room temperature will be displayed after
desired temperature is indicated at dis-
play section for about 5 seconds.
Power Cooling/Heating Mode
Strong cooling/heating will be conducted in
short time.
|
1
Press
button to turn on the indoor.
2
Press
button to operate power cool-
ing/heating mode.
- When power (cooling/heating) button is
pressed during cooling/dehumidification
mode, power cooling will be operated.
In power cooling mode, desired tempera-
ture is set to 18/20 °C and the horizontal
louver is fixed at the highest position.
- When power (cooling/heating) button is
pressed during heating operation, power
heating will be operated.
In power heating mode, desired tempera-
ture is set to 30 °C and the horizontal lou-
ver is fixed at the lowest position.
OPERATING INSTRUCTIONS
Fan Mode
|
1
Press
button to turn on the indoor unit.
2
Press
button to circulate indoor air.
- When canceling operation, press
button once more.
- During fan mode, outdoor fan and com-
pressor will not be operated.
- During fan mode, indoor unit turns on the
fan mode lamp, room temperature lamp,
and fan speed lamp of its display panel.
Auto Operation Mode
|
1
Press
button to turn on the indoor.
2
2
Press
button to select Auto Operation
Mode.
3
Adjust the desired temperature by press-
ing (
) buttons.
- When room temperature is higher than
desired temperature, cooling operation
will be performed.
15
Advertisement
Table of Contents
