Huawei HG552f Quick Start Manual page 3

3
Powering On
To power on the HG552f, press its power button.
After the HG552f is powered on, the HG552f indicator turns on. The following table
lists how the indicators behave when the HG552f is operating correctly. If the
indicators do not behave as expected, ensure that everything is plugged in correctly.
Indicator
Power
ADSL
Internet
WLAN
LAN1 ～ LAN4
Expected State Description
Steady green
Steady green
Blinking green
Off
Steady green
Blinking green
Steady green
Blinking green
The HG552f is powered on.
A digital subscriber line (DSL) connection
has been set up and activated.
A DSL connection is being activated.
The HG552f is in bridge mode.
> The HG552f has WLAN enabled, but is not
transmitting data.
> The HG552f is connected to a wireless
client, such as a computer with a wireless
network adapter, over the WLAN using the
Wi-Fi Protected Setup (WPS) function.
> The HG552f has WLAN enabled, and data
is being transmitted.
> The HG552f is attempting to connect to a
wireless client over the WLAN using the
WPS function.
The LAN port is connected to an Ethernet
device (such as a computer) with a network
cable, but no data is being transmitted.
The LAN port is connected to an Ethernet
device with a network cable, and data is
being transmitted.
3