Technical Parameters
Handset
Type
Dimensions(L×W×H)
Weight
Battery
Continuous standby time
Continuous talk time
For other parameters about battery and charger, refer to their labels.
Battery
The accessory lithium battery of the handset can be immediately used after unpacking. A new battery performs
best after full charge/discharge cycles for the first three times.
Removing & Installing the Battery
Remove: Power off your phone, slide down the cover and then lift the battery from the compartment to remove
it.
Install: Place the bottom of the battery into position, push down on the upper section of the battery until it clicks
into place and then install battery cover.
Charging the Battery
ZTE A36+
107.6mm x 47mm x 13.8mm
48 g
Approx.
(without battery)
Approx. 90 hours ~ 130 hours (subject to network status)
Approx. 2 hours ~ 4 hours (subject to network status)
9