Table of Contents
Advertisement
6.
When finished shaving, rinse shaved area.
7.
Thoroughly rinse shaver head of all gel or foam.
8.
Follow cleaning instructions.
Note: In order to ensure optimal performance, thoroughly rinse the shaver
under water during and after shaving. This will avoid having the foam or gel
dry in the cutting head and clogging the shaver.
SHAVING TIPS (DRY)
•
Always hold the shaver at a right angle to the skin so that all three
heads are touching the skin with equal pressure.
•
Stretch skin with free hand so hairs stand upright, making it easier for
them to enter the cutting chamber.
•
Use moderate to slow, circular stroking movement.
•
The use of short, circular motions in stubborn areas may obtain a
closer shave.
•
Do not press hard against the skin to avoid skin irritation and / or
damage to the rotary heads.
CLEANING & MAINTENANCE
Note: When cleaning your shaver, make sure the shaver is turned off and
disconnected from the power cord.
The shaver is a washable appliance. The head and body may be cleaned
under warm water.
Caution:
•
When cleaning the external surfaces of the shaver, do not use strong
detergents or other chemicals.
•
To dry, wipe the surface of the shaver with a dry towel. Do not use a
hair dryer or heater to dry the shaver.
Note: The shaver head and neck assembly is designed to be detachable
from the shaver body. Simply pull upwards from the neck of the shaver for
easy release. To reattach the neck, align it with the neck attachment cavity
so that it clips back into position.
7
Advertisement
Table of Contents
