Remington PURE CONFIDENCE Use & Care Manual page 5

WR1000AU SPECIFICATIONS
Power System
Full Charge Time
Cordless Run Time
Indicators
Voltage Type
Replacement Head & Cutters
Power System: The WR1000AU shaver can only be used without the
power cord. The shaver will not run while it is charging.
LED Battery Indicators: Lights display the battery charge level
Low Charge: Top LED light will glow solid red to indicate the shaver
•
needs to be recharged. There is less than 5 minutes of run time
remaining.
Charging: Bottom LED light will glow solid green to indicate the
•
battery is taking a charge.
Full Charge: When fully charged the green LED light will go off.
•
Worldwide Voltage: Shaver automatically adapts to an outlet voltage
between 100V and 240V.
Note: Some countries will require the use of a plug adaptor that is not
included with your shaver.
CHARGING
1.
Plug power cord adaptor into the shaver.
2.
Plug the adaptor into the wall outlet.
3.
Fully charge your shaver for 4 hours before its first use. This first
charge is important to the shaver's battery life.
Note: During the initial charge ignore the electronic indicators as they are in
"Start Up Cycle".
Caution:
• Make sure the shaver and your hands are dry when charging the
shaver.
• Always charge the shaver in a cool, dry place.
Cordless (Rechargeable)
4 Hours
Up to 60 Minutes
LED Battery Indicators
Worldwide 100 - 240V
SPR-WR1000AU
5