Advertisement
SHAVING TIPS
• Your Remington WETech Precision Ultra shaver is waterproof. You may use shaving foam or
cream with your shaver. You may also shave in the shower.
• Always hold the shaver at a right angle to the skin so that all three heads are touching the
skin with equal pressure.
• Stretch skin with the free hand so hairs stand upright, making it easier for them to enter the
cutting chamber.
• Use moderate to slow, circular stroking movement. The use of short, circular motions in
stubborn areas may obtain a closer shave, especially along the neck and chin line.
• Do not press hard against the skin to avoid skin irritation and/or damage to the rotary heads.
NOTE: We recommend that you use your new shaver daily for up to four weeks to allow time for
your hair and skin to become accustomed to the new shaving system.
CLEANING & MAINTENANCE
DAILY CLEANING
1. Open the shaver head by pressing the release button on the front of the shaver (Fig. A) and
flipping open the head away from the body of the shaver (Fig. B).
2. Tap out excess hair shavings.
3. Rinse the head of the shaver in running water.
4. Close the head assembly.
MONTHLY CLEANING
• Perform cleaning steps 1 and 2.
• Hold the shaver upside down so that the open cutter assembly is facing towards you. Slide
the blue cutter support frame upwards towards the shaver to release it from the assembly
(Fig. C).
• Pull the cutter support frame away from the inner cutters (Fig. D).
• Thoroughly brush hairs from the inner and outer cutters. Rinse out remaining debris (Fig. E).
• Place the cutter support frame back into position and lock into place (Fig. F-G).
• Align the spring hinge into the slot at the back.
WARNING
• Detach the hand-held part from the supply cord before cleaning in water.
• Shaver heads are suitable for cleaning under an open water tap.
CAUTION
• Shaver heads can be rinsed with water. The water temperature should not exceed 70
degrees. Unplug the shaver before cleaning with water.
• Keep the adaptor and cable dry.
POP UP TRIMMER
• Lubricate the teeth of the trimmer every six months with a drop of sewing machine oil.
4
Advertisement
