BA050035J (UK version) or SA050035D (AUS version) with the output capacity of 5V ac; 350mA. KEEP THE APPLIANCE DRY Remington strongly recommends that an approved Safety Switch (Residual current device) be installed to protect all bathroom power outlets. Ask an electrical contractor for advice. SAVE THESE INSTRUCTIONS...
MB6025AU CUTTING EDGE BEARD TRIMMER USE AND CARE MANUAL Thank you for purchasing your Remington® Cutting Edge Beard Trimmer. Inside this manual you will find instructions on using and caring for your groomer. KEY PARTS 1 30mm Trimmer 2 Beard Attachment head...
CLEANING • Cleaning the beard trimmer attachment: brush away and blowout hair clippings from cutting system, attachment, and top of groomer handle. NOTE: The full size trimmer attachment is permanently lubricated. If you do rinse this attachment with cool or warm water (never use hot water) then it will need to be re-lubricated with light-grade oil or sewing machine oil (1-2 drops over the cutters).
Spectrum Brands Australia Pty Ltd and Spectrum Brands New Zealand Limited WARRANTY AGAINST DEFECTS In this warranty: Australian Consumer Law means the Australian consumer law set out in Schedule 2 to the Competition and Consumer Act 2010; CGA means the New Zealand Consumer Guarantees Act 1993; Goods means the product or equipment which was accompanied by this warranty and purchased in Australia or New Zealand, as the case may be;...
Page 6
New Zealand 0800 736 776 (toll free) AUTHORISED REPAIR CENTRES Visit www.remington-products.com.au for Authorised repair centre details. ® Registered Trade Mark of Spectrum Brands Inc.(SBI), or one of its subsidiaries Made in China to the Specifications of Spectrum Brands, Inc.