Table of Contents
Advertisement
CARPET CARE CONTROL SELECTOR
The carpet care control selector raises and lowers the
height of the foot.
For a medium pile carpet, the best carpet cleaning is
achieved by setting the selector to the INTENSIVE
CLEAN position.
For all other types of carpet try various settings until you
get the best result for your carpet.
Ensure that the cleaner is in an upright (parked) position.
Rotate knob to position best suited to depth of carpet pile.
Note: Using this cleaner for loop carpets or carpets
with pile greater than 30mm is not recommended.
Please consult the floorcare/carpet manufacturer's
recommended cleaning instruction before vacuuming.
!
IMPORTANT!
When cleaning hard floors
such as vinyl or linoleum, move the selector
knob to the HARD floor position. Failure to
do so may cause damage to the floor
surface.
* Certain models only.
48003559 monster IM UK.indd 5
CLEANER RELEASE
Unlock the cleaner by pressing down on the pedal
with your foot.
POWER SWITCH
To switch the cleaner on or off press down on the
pedal with your foot.
- 5 -
CLEANER STORAGE
Turn the cleaner off and remove the plug. Wrap the
cord around the cord storage hooks.
For quick release of the full length of the power cord,
rotate the top storage hook.
4/14/2011 10:17:56 AM
Advertisement
Table of Contents
