Table of Contents
Advertisement
Maintenance
IMPORTANT! Always remove the power plug from the power supply before performing any
maintenance.
Vacuum Cleaner Storage
When not in use, ensure that the cleaner is disconnected from to the power supply and that the cable is
fully retracted. The combination floor tool can be stored in the floor park clip. The powerhead must be
stored separately.
Blockage Indicator Light
If the Blockage Indicator light turns red, this indicates that there is a blockage in the cleaner. If this
happens, switch off the cleaner and remove the power plug from the power supply. Check that there are
no blockages in the filters, hose and hose inlet. Empty the dust bin.
Emptying the Dust Bin
CAUTION! To avoid damaging the dust bin remove the dust bin from the cleaner before cleaning
or replacing the dust bin filter.
Dust Release
Button
12.
1.
Press the Dust Bin Release Button to remove the dust bin from
the cleaner.
Note: the dust bin should be emptied before dust and debris
reaches the "MAX LINE".
2.
Hold the dust bin over a rubbish bin and press the Dust Bin Lid
Release Button to empty the dust bin.
3.
Reinsert the dust bin into cleaner ensuring that it clicks into
place.
Advertisement
Table of Contents
