Managing Network Profiles - Philips SLA500 User Manual

Subnet Mask
Gateway
DNS Server Preferred
DNS Server Alternate
Proxy Server
Proxy Hostname
Proxy Port

Managing Network Profiles

If there have been changes to your wireless network configuration since you installed
your SLA5500NS, or if you are experiencing problems when using the SLA5500NS,
you may need to change the network profile settings using the Configuration Wizard.
Note: Changing network settings requires some technical knowledge of how your
wireless network is set up. If you are unsure of any of the settings, consult the person
who set up your wireless network or refer to the appropriate network documentation.
Changing Settings for the Currently Active Network
Profile
1 Press SYSTEM (6) on the remote control to display the Configuration menu.
2 Press 4 until 'Configuration Wizard' is highlighted. Press 2.
3 Now follow the steps under 'Changing Network Settings' to change the network
profile settings for the currently active profile.
Changing your display menu language
1 Press SYSTEM (6) on the remote control to display the Configuration menu.
2 Press 4 until 'Select Language' is highlighted. Press 2.
3 Select the desired display menu language.
Subnet mask for the network to which
the SLA5500NS is connected.
IP address of the gateway used by the
SLA5500NS.
IP address of the preferred DNS server
used by the SLA5500NS.
IP address of an alternate DNS server
used by the SLA5500NS.
Indicates whether or not traffic to and
from the Internet must first pass through
a proxy server (Disabled/Enabled).
Name of the proxy server host
computer to which the SLA5500NS is
connected.
Port on the proxy server to which the
SLA5500NS is connected.
EN
31