Managing Network Profiles Using The Remote Control - Philips SLA5500 User Manual

Viewing Network Status Settings
For troubleshooting purposes, you can view various network status settings, as listed
under the 'List of Network Status Settings'.
Use the remote control and follow these steps to display network status settings:
1 Press SYSTEM (6) on the remote control to display the Configuration menu.
2 Press 4 until 'Device Status' is highlighted. Press 2.
3 To browse through the Network Status Settings, press 3/4.
Note: To change Device Status Settings, see 'Managing Network Profiles Using the
Remote Control'.
List of Network Status Settings
Setting
Device Name
Firmware Version
Bootloader version
Hardware version
SSID
Network Type
Encryption
Wireless Signal Strength
Wireless Channel
MAC Address
IP Address (DHCP)
IP Address
Explanation
Name of the SLA5500 device.
Example: My SLA5500
Version of the SLA5500 firmware in use.
Version of the SLA5500 bootloader
software in use.
Version of the SLA5500 hardware in use.
SSID (Service Set Identifier) for the
wireless network.
Wireless network type: Infrastructure if
the network uses an Internet Base
station; Ad-hoc if the network uses a
peer-to-peer connection and no Internet
base station.
Indicates whether encryption is enabled
on the wireless network: None or WEP.
Wireless network signal strength.
Wireless channel currently used by the
SLA5500.
Physical MAC address of the SLA5500.
Dynamic IP address currently allocated
to the SLA5500 by a DHCP server
(if DHCP in use).
Static IP address currently allocated to
the SLA5500 (if DHCP not in use).
EN
27