Adjusting Tv Screen Size - ActionTec ScreenBeam Pro User Manual

l
Disable: Select "Disable" to disable the USB port on the receiver.
l
Only allow firmware update: Select "Only allow firmware update" to allow users to
update firmware for the receiver through the USB port.
l
Enable: Select "Enable" to allow full functions of the USB port. In this case, users not
only can upgrade the receiver, but also can control the source device by connecting a
keyboard/mouse to the receiver via the USB port (with the User Input Back Channel
(UIBC) or USB over IP (UoIP) function enabled).
Ÿ
UIBC: The connected keyboard/mouse does not support combo keys or mouse
right-click.
Note: Working with a Windows 10 source device, combo keys and mouse
right-click are also supported.
Ÿ
UoIP: The connected keyboard/mouse supports full functions.
Note: UoIP is compatible with Intel WiDi only.
3. Click the Apply button, and then click OK on the pop-up message box to confirm.
5.3.15.

Adjusting TV Screen Size

If edges of the device screen cannot be seen on the HDTV or you can see black edges, you
can adjust the TV screen size (overscan).
Follow the procedure below to adjust the size of your TV screen:
1. Go to the Features tab page by clicking the Features tab.
2. Go to the TV Screen Size (Overscan Settings) line, and select the desired option in the
TV Screen Size (Overscan Settings) drop-down box.
Ÿ
The value for TV screen size ranges from 0 to 25. The larger the value is, the bigger
the screen will be.
44