Setting Up Login Username And Password For The Local Management Console - ActionTec ScreenBeam Pro User Manual

3. Type a new name in the Device Name box.
4. Click the Apply button, and then click OK on the pop-up message box to confirm.
5.3.2. Setting up Login Username and Password for the Local
Management Console
You can modify the user name and password for logging into the local management server.
Follow the procedure below to modify the receiver's login username and password:
1. Go to the Device Configuration tab page by clicking the Device Configuration tab.
2. Type new username and password in the Administrator Username and Administrator
Password boxes.
3. Click the Apply button, and then click OK on the pop-up message box to confirm.
34