Connecting Via Intel® Widi App (Gen 4) - ActionTec ScreenBeam Pro User Manual

Pro WiDi (Gen 6) and has the app installed.
l
Your device's screen will be displayed on the HDTV in about ten seconds if Intel
WiDi (Gen 6)/Intel Pro WiDi (Gen 6) app is not installed on your device. Refer to
5.3.6. Setting up Inactive Source Grace Period for Managed Meetings for detail.
3.3. Connecting via Intel® WiDi App (Gen 4)
This section explains how to connect a device running Intel's WiDi application to the
receiver.
Follow the procedure below to connect your device to the receiver:
1. Launch the Intel Wireless Display application on the device. To find the application, go
to Windows Search on the device and search for "Intel WiDi".
2. The Intel WiDi application scans for available receivers automatically. Select your
receiver and click Connect. (The "Connect Automatically" checkbox is optional.)
Note: If your receiver is not found, you can click the Scan button to scan again.
3. A PIN entry box is displayed on the screen of the WiDi device, and a PIN code and host
name (QA-PC01 in this example) of the connecting device are displayed on the HDTV.
Type the PIN in the PIN entry box on the WiDi device, and then click Connect.
13