Setting Up Managed Meetings - ActionTec ScreenBeam Pro User Manual

Note: The receiver's new host name takes effect after the reboot.

5.3.5. Setting up Managed Meetings

The Managed Meetings function allows meeting participants to share the wireless display
interactively, or allows the meeting moderator to manage the display requests from the
meeting participants.
The Managed Meetings is available when AGO is enabled. And it works with Intel Pro WiDi
only.
For more information about Managed Meetings, refer to Section 4.1. Intel Pro WiDi and
Managed Meeting.
Follow the procedure below to set up the receiver's Managed Meetings function:
1. Go to the Features tab page by clicking the Features tab.
2. To enable or disable Managed Meetings, set the Managed Meetings function to Enable
or Disable, respectively.
3. For better communication, you can define a port (Managed Meetings Port) for the
Managed Meetings, as shown below:
4. Click the Apply button, and then click OK on the pop-up message box to confirm.
36