Attaching The Fan Blades - HAMPTON BAY AG524PR-FB Use And Care Manual

Assembly — Attaching the Fan Blades
Removing the rubber
8
packing mounts
□
The fan motor assembly (E) is shipped with rubber
packing mounts (TT) to prevent movement during
transportation. Remove the five rubber packing
mounts (TT) from the fan motor assembly (E) and
discard prior to attaching the blade arms (G).
Fastening the blade assemblies
10
to the motor
WARNING: To reduce the risk of personal injury, do not
bend the blade arms (G) while installing, balancing the blades
(F), or cleaning the fan. Do no insert foreign objects between
rotating fan blades (F).
□
Fasten the blade assemblies (G) to the fan motor
assembly (E) by lining up the slots (UU) of the blade
arms (G) with the tabs (VV) on the motor.
□
Tighten the two blade arm screws and lock washers (II)
already installed in the blade arms (G).
□
Repeat this procedure for the remaining blade arms (G).
Attaching the blades to the
9
blade arms
□
Attach the blades (F) to the blade arms (G) using the
three blade attachment screws and fiber washers
(AA). Insert a blade attachment screws and fiber
washers (AA) into the blade arm (G), but do not
tighten.
□
Repeat for the two remaining screws and fiber
washers (AA).
□
Tighten each screw securely starting with the center
screw. Make sure the blade (F) is straight.
□
Repeat these steps for the remaining blades.
E
TT
VV
UU
14
AA
F
G
E
G
II
F