Page 1
Model # AG524-WH USE AND CARE GUIDE GLENDALE 52 IN. CEILING FAN Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM...
Table of Contents Table of Contents ............Operation ..............Pull Chain Operating Instructions .......... Safety Information ............Reverse Switch Operating Instructions ........Warranty ................. Care and Cleaning ............Pre-Installation .............. Troubleshooting ............Tools Required ................. Service Parts ............... Hardware Included ..............Package Contentd ..............
Safety Information To reduce the risk of electric shock, ensure electricity has However, there is no guarantee that interference will not occur been turned off at the circuit breaker or fuse box before in a particular installation. If this equipment does cause harmful beginning.
Warranty We warrant the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser. We also warrant that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of purchase by the original purchaser.
Pre-Installation (continued) DUAL MOUNTING INSTRUCTIONS DUAL MOUNTING INSTRUCTIONS This ceiling fan is supplied with two types of hanging assemblies: the standard ceiling installation using the downrod with ball and socket mounting, and the "close-to-ceiling" mounting. The "close-to-ceiling" mounting is recommended in rooms with less than 8 ft. ceilings or in areas where additional space is desired from the floor to the fan blades.
Installation MOUNTING OPTIONS MOUNTING OPTIONS You may need a longer downrod to maintain proper WARNING: To reduce the risk of fire, electric shock, or NOTE: blade clearance when installing on a steep, sloped ceiling. personal injury, mount the fan to an outlet box marked acceptable for fan support using the screws provided with the The maximum angle allowable is 18°...
Assembly — Standard Ceiling Mounting Preparing the canopy Preparing the motor □ □ Remove the cotter pin (FF), and clevis pin (EE), and Remove the two non-slotted canopy mounting screws loosen the two collar setscrews (GG) from the motor with lock washers (DD) from the canopy (B), and collar.
Assembly — Close-to-Ceiling Mounting Preparing the canopy Preparing the motor □ □ Remove three of the six collar mounting screws with Remove the mounting bracket (A) from the canopy (B) by loosening the four canopy mounting screws with lock washers (HH) (every other one) from the collar lock washers (DD) on the top of the canopy (B).
Assembly — Hanging the Fan Attaching the fan to the electrical box WARNING: To reduce the risk of fire, electric shock or other personal injury, mount the fan only to an outlet box or supporting system marked acceptable for fan support and use the mounting screws provided with the outlet box.
Page 12
Assembly — Hanging the Fan (continued) Making the electrical connections Ground conductor WARNING: To avoid possible electrical shock, be sure Black White electricity is turned off at the main fuse box before wiring. WARNING: Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire nuts (except for the ground wire).
Page 13
Assembly — Hanging the Fan (continued) Standard ceiling mounting Close-to-ceiling mounting WARNING: Locking slots of the canopy (B) are provided WARNING: Make sure the tab on the mounting bracket (A) only as an aid to mounting. Do not leave the fan assembly properly sits in the groove in the hanger ball (D) before unattended until all four canopy mounting screws (DD) are attaching the canopy (B) to the mounting bracket (A) by...
Assembly — Attaching the Fan Blades Removing the rubber Attaching the blades to the packing mounts blade arms □ □ The fan motor assembly (E) is shipped with rubber Attach the blades (F) to the blade arms (G) using the three blade attachment screws and fiber washers packing mounts (MM) to prevent movement during (AA).
Assembly — Installing the Light Kit Attaching the light kit to Mounting the glass shades and the switch housing installing the light bulbs □ Mount the glass shades (I) to the light sockets by CAUTION: Before starting the installation, disconnect the partially unscrewing the three light holder power by turning off the circuit breaker or removing the fuse thumbscrews (CC) on each glass holder, inserting the...
Operation PULL CHAIN OPERATING INSTRUCTIONS PULL CHAIN OPERATING INSTRUCTIONS Install two pull chains and fobs (K) onto the pull chains located in the switch housing and light kit (H). Turn on the power and check the operation of the fan. The pull chain controls the fan speed as follows: 1 pull - High, 2 pulls - Medium, 3 pulls - Low, and 4 pulls - Off.
Care and Cleaning Do not □ □ Check the support connections, brackets, and blade Use water when cleaning. Water could damage the motor, attachments twice a year. Make sure they are secure. or the wood, or possibly cause an electrical shock. Because of the fan’s natural movement, some □...
Page 18
Troubleshooting (continued) Problem Problem Solution Solution □ □ Verify that all blades and blade bracket screws are secure (most fan wobble problems are caused by loose parts). Once the fan is properly installed, run the ceiling fan for 10 minutes to let the fan self-adjust.
Service Parts Part Part Description Description Part Part Description Description Mounting bracket (preassembled) Blade attachment screw and fiber washer Canopy Plastic wire nut Canopy bottom cover Light holder thumbscrew (preassembled) Hanger ball/downrod assembly Canopy mounting screw with lock washer (preassembled) Fan motor assembly Clevis pin (preassembled) 5 blades...
Page 20
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use. AG524WH0002-A...