Using Quick Wireless Connection (Windows) - Epson V11H952020 User Manual

7. Do one of the following:
• Press the LAN button on the remote control.
• Select Display the QR Code in the projector's Network menu.
Your projector displays the QR code on the projection surface.
Note: If you do not see the QR code after pressing the LAN button, press Enter to display it.
8. Start Epson iProjection on your mobile device.
9. Use the QR code reader feature to read the QR code and connect your device to the projector. Visit
epson.com/iprojection
Parent topic:

Using Quick Wireless Connection (Windows)

You can create a Quick Wireless Connection USB Key to quickly connect the projector to a Windows
computer wirelessly. Then you can project your presentation and remove the key when you are done.
Note: A USB flash drive is not included with your projector.
1. Create a Quick Wireless Connection USB Key with a USB flash drive and the Epson iProjection
(Windows/Mac) software.
Note: See the online Epson iProjection Operation Guide (Windows/Mac) for instructions.
2. Make sure the wireless LAN module is installed in your projector.
3. Turn on the projector.
4. Press the LAN button on the remote control.
The LAN standby screen is displayed.
5. Verify the SSID and IP address.
6. Insert the USB key into the projector's USB-A port.
You see a projected message that the network information update is complete.
7. Remove the USB key.
(U.S.) or epson.ca/iprojection
Wireless Network Projection
(Canada) for instructions.
53