Transferring Settings Using A Usb Flash Drive - Epson V11H952020 User Manual

Caution: If the copy process fails due to a power failure, communication error, or for any other reason,
Epson will not be responsible for any repair costs incurred.
The following settings will not transfer between projectors:
• Network menu settings other than those in the Notifications and Others menus

Transferring Settings using a USB Flash Drive

Transferring Settings using a Computer
Parent topic:
Transferring Settings using a USB Flash Drive
After saving projector settings to a USB flash drive, you can transfer them to another projector of the
same model.
Note: Use an empty flash drive. If the drive contains other files, the transfer may not complete correctly.
The flash drive must use the FAT format and cannot have any security features.
Note: Do not adjust image settings on a projector until after you transfer settings to it. Otherwise, you
may have to repeat your adjustments.
1. Turn off the projector and unplug the power cord from the projector's power inlet.
2. Insert the flash drive into the USB-A port.
3. Press and hold the Esc button on the remote control as you connect the power cord to the
projector's power inlet.
4. When all of the projector lights turn on, release the Esc button.
All of the status lights flash to indicate that settings are transferring to the USB device. When the
lights stop flashing, the projector enters standby mode.
Caution: Do not unplug the power cord or remove the flash drive while the lights are flashing. This
could damage the projector.
5. Once the projector enters standby mode, remove the flash drive.
Note: The USB flash drive contains a single file called PJCONFDATA.bin if the transfer was
successful. If the drive contains other files, the transfer may not have completed correctly. If you
need to change the file name, add text after PJCONFDATA using only alphanumeric characters. If
Adjusting Projector Features
149