Epson V11H952020 User Manual page 194

On/Standby Status light
(power) light
Blue Off
Flashing blue Off
Blue Flashing blue Off
Varies Flashing blue Flashing
Flashing blue Varies
Off Flashing blue Off
Lamp light Temp light
Off Off
Off Off
Off
Varies
orange
Varies Flashing
orange
Orange
194
Status and solution
Standby, sleep mode, or network
monitoring and control
Preparing for network monitoring. All
features are disabled.
Shutting down. All buttons are
disabled.
Refresh mode is in progress.
High temperature warning. If the
temperature gets too high, projection
automatically stops.
• Make sure that the vents and air filter
are not clogged with dust or
obstructed by nearby objects.
• Make sure the room temperature is
not too hot.
• Clean or replace the air filter.
Projector has overheated and turned
off. Leave it turned off to cool down for
five minutes.
• Make sure that the vents and air filter
are not clogged with dust or
obstructed by nearby objects.
• Make sure the room temperature is
not too hot.
• Clean or replace the air filter.
• If operating the projector at high
altitude, turn on High Altitude
Mode.
• If the problem persists, unplug the
projector and contact Epson for help.