Epson EX3280 Quick Setup

EX3280/VS260
Quick Setup
IMPORTANT: Before using this product, make sure you read these instructions
and the safety instructions in the online User's Guide.
Note: These illustrations show the EX3280, but the instructions are the same
for the VS260 unless otherwise noted.
Contents
Make sure your projector box includes all of these parts (soft carrying case not
included with VS260):
Connect the projector
Choose from the following connections. See the sections below or the online
User's Guide for details.
Computer
HDMI port
Connect one end of an HDMI cable to the projector's HDMI port and the other
end to an HDMI port on your computer.
Computer port
Connect one end of a VGA cable to the projector's Computer port and the
other end to your laptop or computer's
your laptop to external display (see "Troubleshooting").
USB port
Connect the square end of a USB cable to the projector's USB-B (square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows Vista or later: After turning on the projector, follow the on-screen
®
instructions to install the Epson ® USB Display software (EMP_UDSE.EXE; only
on first connection). If the software screen does not display automatically, open
My Computer, Computer, or This PC, then double-click EPSON_PJ_UD.
OS X 10.7.x or higher: After turning on the projector, the setup folder for
USB Display appears in the Finder. Double-click USB Display Installer and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
Video device
Connect one end of an HDMI cable to the projector's HDMI port and the other
end to an HDMI port on your video device.
USB cable
HDMI cable
VGA cable
monitor port. Make sure to switch
HDMI cable
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector. The
3
Press the power button on the projector or remote control. The
projector beeps, the Status light flashes blue, and then stays on.
Note: To shut down the projector, press the
4
Use the arrow buttons on the remote control to highlight any of the
options on the Home screen that appears, then press
You can switch between projection sources and quickly access various
adjustment options from this screen.
5
The default language of the menu system is English. To select another
language, press the Menu button on the projector or remote control.
Select Extended and press
language and press . Press the Menu button to exit the menu system.
Adjust the image
1
If you don't see an image, press the Source Search button on the
projector or remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
To reduce or enlarge the image, press the E-Zoom buttons on the remote
control.
power light on the projector turns blue.
power button twice.
to select it.
. Select Language and press
. Select your