Fcc Compliance Statement - Epson V11H952020 User Manual

No. Symbol
25
26
27
28
Parent topic:

FCC Compliance Statement

For United States Users
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause interference to radio and television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Approved Standards
ISO3864
IEC60417
No. 5057
IEC60417-6056
IEC60417-6043
—
Notices
Description
Caution, movable parts
To indicate that you must keep away
from movable parts according to
protection standards.
Caution, moving fan blades
To indicate that you must keep away
from moving fan blades.
Caution, sharp corners
To indicate that you must not touch sharp
corners.
To indicate that looking into the lens
while projecting is prohibited.
226