Reset Menu - Epson EB-L1105U User Manual

List of Functions
Submenu
Status
Serial Number
Lens Type
Event ID
HDBaseT Sig-
nal Level
Light Source Light Source
Info Hours
Estimated Re-
mains
Version Main
Video2
Status Information
* The cumulative operating time is displayed as "0H" for the first 10 hours. 10
hours and above is displayed as "10H", "11H", and so on.
Function
This is information about errors that have
occurred on the projector.
This information may be needed if service
is required.
Displays the projector's serial number.
Displays the model number of your lens.
When problems occur when the projector
and computer are connected through the
network, information on the problem is
displayed using an Event ID. See the
following page for information on
interpreting the Event ID.
s "About Event ID" p.181
You can display the image signal
information from the HDBaseT port.
Displays the operating time for the light
source according to the light source mode.
When Constant Brightness is set to On,
this displays the amount of time for which
the brightness of the light source can be
maintained.
Displays the projector's firmware version
information.
Displays the projector's status.
s "Reading the Status Display" p.163

Reset Menu

Submenu
Reset All Memo- Resets all names and settings saved in Memory, Lens Position,
ries and Geometry Correction.
s "Memory Function"
You can reset all items in the Configuration menu to their default
Reset All Config
settings.
The following items are not reset to their defaults: Input Signal,
Memory, User's Logo, all items for Network menus, Language,
Date & Time, Panel Alignment, Color Uniformity, Lens
Calibration, Color Calibration, Projector Grouping, Screen
Matching, and Color Matching.
146
Function
p.112