Philips HD5730/11 User Manual page 31

Problem
The milk contains
bubbles or squirts
out of the milk
frothing spout.
Some water is spilled
when I place or
remove the water
tank.
The grinder makes
a rattling noise and
the message 'NO
COFFEE BEANS!'
appears.
The appliance makes
a loud banging noise.
Water drops
or condensation on
the outside of the
appliance.
Possible cause
The milk jug is not placed
correctly.
The milk is not cold enough
or you have not used
skimmed or semi-skimmed
milk.
It is normal that some water
is spilled when you place and
remove the water tank.
There is a stone or a twig in
the grinder.
Air is trapped inside the
appliance.
Due to the use of steam,
condensation or water
drops may appear on the
outside of the appliance.
Solution
Clean the nozzle for the milk jug.
Place the milk jug correctly into the appliance.
Use skimmed or semi-skimmed milk at
refrigerator temperature. If you still do not
get the desired result, try a different milk brand.
The spilled water automatically flows into the
drip tray.
Contact an authorised Philips service centre.
Always return the appliance to an authorised
Philips service centre for examination or repair.
Do not attempt to repair the appliance yourself.
Perform the 4 steps described in chapter 'Using
the espresso maker', section 'Brewing espresso,
right above action 7.
Dry the outside of the appliance with a dry cloth.
EnglisH
31