Table of Contents
Advertisement
Section 3 - Configuration
The QuickVPN feature is a fast and easy way to create a profile for secure remote access to a Local Area Network (LAN). This profile can be used to
configure other devices to connect to your LAN via a secure VPN tunnel. Note that only one account (user name/password) can be created.
From the Features menu, click Quick VPN. Click Advanced Settings to expand the list and see all of the options. To create users to give or remove
VPN access to, click User and refer to page 72.
L2TP over
Enable to allow QuickVPN access to your network.
IPSec:
Username:
Enter a username of your choice.
Password:
Enter a password of your choice.
PSK:
Enter a pre-shared key (PSK). The client attempting to connect to
your network through a VPN will need to enter this key.
Authentication
Select either MSCHAPv2, PAP (Password Authentication Protocol),
Protocol:
or CHAP (Challenge-Handshake Authentication Protocol).
MPPE:
Select either None, RC4-40, or RC4-128 (encryption).
Click Save when you are done.
D-Link DIR-882 User Manual
QuickVPN
66
Advertisement
Table of Contents
