Agilent Technologies 54810A User's Quick Start Manual page 132

Product Warranty
This Agilent Technologies
product has a warranty
against defects in material
and workmanship for a
period of three years from
date of shipment. During the
warranty period, Agilent
Technologies will, at its
option, either repair or
replace products that prove
to be defective. For warranty
service or repair, this
product must be returned to
a service facility designated
by Agilent Technologies. For
products returned to Agilent
Technologies for warranty
service, the Buyer shall
prepay shipping charges to
Agilent Technologies and
Agilent Technologies shall
pay shipping charges to
return the product to the
Buyer. However, the Buyer
shall pay all shipping
charges, duties, and taxes for
products returned to Agilent
Technologies from another
country. Agilent
Technologies warrants that
its software and firmware
designated by Agilent
Technologies for use with an
instrument will execute its
programming instructions
when properly installed on
that instrument. Agilent
Technologies does not
warrant that the operation of
the instrument software, or
firmware will be
uninterrupted or error free.
Limitation of Warranty
The foregoing warranty shall
not apply to defects resulting
from improper or inadequate
maintenance by the Buyer,
Buyer- supplied software or
interfacing, unauthorized
modification or misuse,
operation outside of the
environmental specifications
for the product, or improper
site preparation or
maintenance.
No other warranty is
expressed or implied. Agilent
Technologies specifically
disclaims the implied
warranties of
merchantability or fitness for
a particular purpose.
Exclusive Remedies
The remedies provided
herein are the buyer's sole
and exclusive remedies.
Agilent Technologies shall
not be liable for any direct,
indirect, special, incidental,
or consequential damages,
whether based on contract,
tort, or any other legal
theory.
Assistance
Product maintenance
agreements and other
customer assistance
agreements are available for
Agilent Technologies
products. For any assistance,
contact your nearest Agilent
Technologies Sales Office.
Certification
Agilent Technologies
certifies that this product
met its published
specifications at the time of
shipment from the factory.
Agilent Technologies further
certifies that its calibration
measurements are traceable
to the United States National
Institute of Standards and
Technology, to the extent
allowed by the Institute's
calibration facility, and to the
calibration facilities of other
International Standards
Organization members.
About this edition
This is the Infiniium
Oscilloscopes User's Quick
Start Guide.
Publication number
54810-97045, Jan. 2000
Print history is as follows:
54810-97000, May 1997
54810-97014, March 1998
54810-97026, May 1998
54810-97029, May 1999
54810-97041, Sept. 1999
54810-97045, Jan. 2000
Printed in USA.
New editions are complete
revisions of the manual.
Many product updates do not
require manual changes; and,
conversely, manual
corrections may be done
without accompanying
product changes. Therefore,
do not expect a one-to-one
correspondence between
product updates and manual
updates.
Windows 98 is a trademark
of Microsoft Corporation.