Agilent Technologies 54810A User's Quick Start Manual page 129

DECLARATION OF CONFORMITY
Manufacturer's Name:
Manufacturer's Address:
declares, that the product
Product Name:
Model Number(s):
Product Option(s):
conforms to the following Product Specifications:
Safety: IEC 1010-1:1990+A1 / EN 61010-1:1993
UL 3111
CSA-C22.2 No. 1010.1:1993
EMC: CISPR 11:1990 / EN 55011:1991
IEC 555-2:1982 + A1:1985 / EN60555-2:1987
IEC 555-3:1982 + A1:1990 / EN 60555-2:1987 + A1:1991
IEC 801-2:1991 / EN 50082-1:1992 4 kV CD, 8 kV AD
IEC 801-3:1984 / EN 50082-1:1992 3 V/m, {1kHz 80% AM, 27-1000 MHz}
IEC 801-4:1988 / EN 50082-1:1992 0.5 kV Sig. Lines, 1 kV Power Lines
Supplementary Information:
The product herewith complies with the requirements of the Low Voltage Directive 73/23/
EEC and the EMC Directive 89/336/EEC, and carries the CE-marking accordingly.
This product was tested in a typical configuration with Agilent Technologies test systems.
Colorado Springs, 02/12/1999
European Contact: Your local Agilent Technologies Sales and Service Office or Agilent Technologies GmbH, Department ZQ
/ Standards Europe, Herrenberger Strasse 130, D-71034 Böblingen Germany (FAX: +49-7031-14-3143)
according to ISO/IEC Guide 22 and EN 45014
Agilent Technologies
Colorado Springs Division, 1900 Garden of the Gods Road,
Colorado Springs, CO 80907, U.S.A.
Infiniium Oscilloscope
54810A, 54815A, 54820A, 54825A, 54835A, 54845A
All
Group 1, Class A
Ken Wyatt, Quality Manager