Table of Contents
Advertisement
SAFETY INSTRUCTIONS
CAUTION
Ground the equipment to
prevent mutual interference.
Observe the following compass safe
distances to prevent interference to a
magnetic compass:
Standard
compass
CV-301
0.85 m
CV-302
1.55 m
CV-300
1.25 m
CV-304
1.10 m
Do not allow warm water or any other
liquid other than seawater or freshwater
to contact the transducer.
Damage to the transducer may result.
Do not install the transducer where
noise or air bubbles is present.
Performance will be affected.
Steering
compass
0.55 m
0.95 m
0.70 m
0.70 m
ii
CAUTION
The transducer cable must he handled
carefully, following the guidelines
below.
• Keep fuels and oils away from the
cable.
• Locate the cable where it will not be
damaged.
• The cable sheath is made of chloro-
phrene or polychloride vinyl, which
are easily by damaged plastic solvents
such as toulene. Locate the cable
well away from plastic solvents.
Advertisement
Table of Contents
