Table of Contents
Advertisement
Temperature
1. Click Temp in the system menu to show the "Temp" dialog box.
2. Set the following items.
Temp input: Choose CIF or NMEA as the temperature data source as appropriate.
Temp adjust: Enter compensation value for CIF input. (Setting range: -20.0 to +20.0
degrees)
Net
1. Click Net in the system menu to show the "Net" dialog box.
2. Set the following items.
Input data: Choose CIF or NMEA as the net data source as appropriate.
CIF: The temperature & depth data from the net recorder.
NMEA: The temperature & depth data from the trawl sonar.
Horizontal axis (Min): Set minimum value of the horizontal axis of the vertical
Horizontal axis (Max): Set maximum value of the horizontal axis of the vertical
temperature graph. (Setting range: -5.0 to +35.0 degrees)
temperature graph. (Setting range: -5.0 to +35.0 degrees)
17
3. SYSTEM SETTINGS AFTER INSTALLATION
Advertisement
Table of Contents
