Using The Screen Adjustment Function; Using The Digital Zoom Function - Panasonic PT-VMZ60 Operating Instructions Manual

Chapter 3 Basic Operations - Operating with the remote control
Note
f You can also use this function with the <AUTO SETUP> button on the control panel.
f The clock phase may shift even if the automatic adjustment is performed. In such a case, adjust the [POSITION] menu → [CLOCK PHASE].
(x page 72)
f When the input signal is a blurred-edge image or a dark image, it may not be able to be adjusted correctly even if the automatic adjustment
is performed. In this case, adjust the following settings.
g [POSITION] menu → [DOT CLOCK] (x page 72)
g [POSITION] menu → [CLOCK PHASE] (x page 72)
g [POSITION] menu → [SHIFT] (x page 71)
f Automatic adjustment may not be performed depending on the computer model and input signal.
f Images may be disrupted for a few seconds during automatic adjustment, but it is not a malfunction.
f Automatic adjustment can be canceled by pressing any button on the remote control during the automatic adjustment operation.
f If the automatic setup function is used while moving images are being input, the adjustment may not be performed properly even for a signal
that can use automatic setup.

Using the screen adjustment function

The [SCREEN ADJUSTMENT] screen can be displayed.
You can correct the distortion of the projected image that occurs when the projector is installed tilted or when the
screen is tilted or curved.
button
1) Press the <SCREEN ADJ> button to display [KEYSTONE] individual adjustment screen.
Or press the <SCREEN ADJ> button again to
screen.
Or press the <SCREEN ADJ> button again to
screen.
f If you have adjusted values in any of the individual adjustment screen, the individual adjustment screen is
not switched to the next screen even if you press the <SCREEN ADJ> button.
[KEYSTONE]
[CORNER CORRECTION]
[CURVED CORRECTION]
f To adjust [KEYSTONE], proceeds to Step 3).
2) Press <ENTER> button to select an item.
f The items will switch each time you press the button.
3) Press asqw to adjust the value.
Note
f One of [KEYSTONE], [CORNER CORRECTION] and [CURVED CORRECTION] setting value is valid.
f For more details, refer to the [POSITION] menu → [SCREEN ADJUSTMENT]. (x page 69)

Using the digital zoom function

(Only for still image-based signals input)
You can enlarge images. You can also change the location of the images to be enlarged.
buttons
1) Press the <D.ZOOM -> button/<D.ZOOM +> button.
f The moving screen is displayed when executing the remote control operation, and the [DIGITAL ZOOM]
individual adjustment screen is not displayed.
54 - ENGLISH
display
display
Adjusts when the trapezoid of the projected image is distorted.
Adjusts when the four corners of the projected image are distorted.
Adjusts any curved distortion in the projected image.
[CORNER CORRECTION] individual adjustment
[CURVED CORRECTION] individual adjustment