Taking Pictures Using Burst Mode - Panasonic LUMIX DC-GH5S Operating Instructions For Advanced Features

5. 4K Photo and Drive Settings

Taking Pictures using Burst Mode

Applicable modes:
Pictures are taken continuously while the shutter button is pressed.
1
Set the drive mode dial to [
2
Focus on the subject and take a picture.
• Hold down the shutter button fully to activate the Burst Mode.
Setting the burst rate
∫
> [Rec] > [Burst Rate]
MENU
Burst speed
(pictures/
second)
Live View
during Burst
Mode
With RAW files
¢2
Without RAW
¢1 This setting is applied when creating RAW files with [RAW Bit Size] set to [14bit].
¢2 Number of recordable pictures
¢3 When recording is performed under the test conditions specified by Panasonic.
The burst speed will become slower halfway. However, pictures can be taken until the
capacity of the card becomes full. Depending on recording conditions, the number of burst
pictures that can be taken will be reduced.
• The burst speed may become slower depending on the following settings.
– [Picture Size]/[Quality]/[Sensitivity]/Focus Mode/[Focus/Release Priority]
(High speed)
AFS/MF 12
AFF/AFC 8
AFS/MF
AFF/AFC
files
].
[H]
(Middle speed)
RAW
1
14 bit ¢
11
7
None
Available
80 or more
600 or more
115
t 4:3
AFS AFS
L
p
[M]
RAW
1
14 bit ¢
7 6
6 5
Available Available
3
¢
3
¢
H
[L]
(Low
speed)
2