Panasonic LUMIX DC-GH5S Operating Instructions For Advanced Features page 201

7. Recording Motion Pictures
Setting the output bit value for C4K/60p or 4K/60p (C4K/50p or 4K/50p)
∫
> [Motion Picture] > [HDMI Rec Output] >
MENU
[4K/60p Bit Mode] ([4K/50p Bit Mode])
Settings: [4:2:2 10bit]/[4:2:0 8bit]
• Motion pictures cannot be recorded to the card at [4:2:2 10bit] during HDMI output.
• This item works only when [Rec Quality] is set to an item for motion pictures in C4K/60p or 4K/
60p (C4K/50p or 4K/50p) format and Creative Video Mode is used.
Setting the picture quality (size/frame rate) for HDMI output
∫
Down-convert the size/frame rate when the motion picture size is set to [4K] or [C4K] in
[Rec Quality].
> [Motion Picture] > [HDMI Rec Output] > [Down Convert]
MENU
Down-converts the size/frame rate setting of images to that of the connected
[AUTO]
device to output them.
[4K/30p]
Down-converts the size/frame rate setting of images from [C4K/60p]/[C4K/50p]/
[4K/60p]/[4K/50p] to [C4K/30p]/[C4K/25p]/[4K/30p]/[4K/25p] to output them.
([4K/25p])
Down-converts the size setting to [1080] and outputs images in progressive
[1080p]
format.
[1080i] Down-converts the size setting to [1080] and outputs images in interlace format.
[OFF] Outputs images at a size/frame rate set in [Rec Quality].
• When [Down Convert] is operating, focusing with Auto Focus may take longer than usual and
the tracking performance of continuous focusing may slow down.
201