Panasonic LUMIX DC-GH5S Operating Instructions For Advanced Features page 257

9. Using Menu Functions
[Monitor Display]/[Viewfinder]
Brightness, colour, or red or blue tint of the Monitor/viewfinder is adjusted.
1
Select the settings by pressing 3/4, and adjust with 2/1.
2
Press [MENU/SET] to set.
• It will adjust the monitor when the monitor is in use, and the viewfinder when the viewfinder is
in use.
• Some subjects may appear differently from actuality on the monitor. However, this does not
affect the recorded pictures.
[Monitor Luminance]
„ [AUTO]
...
[MODE1]
1
...
[MODE2]
2
...
[MODE3]
3
• Some subjects may appear differently from actuality on the monitor. However, this does not
affect the recorded pictures.
• The monitor automatically returns to standard brightness if no operations are performed for
30 seconds when recording in [MODE1]. It will light up brightly again with button or touch
operation.
• When [AUTO] or [MODE1] is set, the usage time is reduced.
• [AUTO] is only available in the Recording Mode.
• The initial setting when using the AC adaptor (optional) is [MODE2].
Not available in these cases:
• [Monitor Luminance] is not available when [Night Mode] is set.
[Eye Sensor]
[Sensitivity] This will set the sensitivity of the eye sensor.
This will set the method for switching between the monitor and viewfinder.
[LVF/MON AUTO] (automatic switching between the monitor and
[LVF/Monitor viewfinder)/
Switch] [LVF] (viewfinder)/[MON] (monitor)
• If you press [LVF] to switch the display, the [LVF/Monitor Switch] setting will
also switch.
The brightness is adjusted automatically depending on how bright it is
around the camera.
Make the monitor brighter.
Set the monitor to the standard brightness.
Make the monitor darker.
257