Reservoir/Rear Bushing Disassembly - Follett L60417 Operation And Service Manual

35. Install gear motor insulation.
36. Connect transport tube to louvered docking assembly.

Reservoir/rear bushing disassembly

1. Press CLEAN button to purge
evaporator. Turn power OFF
when LO WATER lights.
Note: In many applications,
removing the gearmotor,
main housing, and
auger will allow for
the ice machine to be
pulled out further for
better access to rear
components.
2. Slide ice machine forward to
gain access.
3. Use Fig. 35 as disassembly
guide.
Note: Use petrol-gel when
installing/reinstalling
o-rings.
HCD710A, HMD710A
Fig. 33
Fig. 34
Fig. 35
25