Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Datavideo HBT-50T
Summary of Contents for Datavideo HBT-50T
- Page 1 4 Channel HDBaseT Receiver HBT-50T Instruction Manual...
-
Page 2: Table Of Contents
SERVICE AND SUPPORT ....................... 16 Disclaimer of Product & Services The information offered in this instruction manual is intended as a guide only. At all times, Datavideo Technologies will try to give correct, complete and suitable information. However, Datavideo Technologies cannot exclude that some information in this manual, from time to time, may not be correct or may be incomplete. -
Page 3: Fcc Compliance Statement
7. This product should only be operated from the type of power source indicated on the marking label of the AC adapter. If you are not sure of the type of power available, consult your Datavideo dealer or your local power company. -
Page 4: Warranty
The product warranty period beings on the purchase date. If the purchase date is unknown, the product warranty period begins on the thirtieth day after shipment from a Datavideo office. All non-Datavideo manufactured products (product without Datavideo logo) have only one year warranty from the date of purchase. -
Page 5: Disposal
The three-year warranty must be registered on Datavideo's official website or with your local Datavideo office or one of its authorized distributors within 30 days of purchase. Disposal For EU Customers only - WEEE Marking This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. -
Page 6: Product Overview
1. Product Overview The HBT-50, an HDBaseT 4-channel receiver, is a critical part of a live production chain as it powers the connected PTZ cameras using PoE, delivers video and audio over an Ethernet cable, and acts as an RS-232/422 interface between the connected PTZ cameras and the camera controller to allow configuration of camera parameters such as iris, focus, presets, etc. -
Page 7: System Diagram
System Diagram... -
Page 8: Connections
2. Connections Various connections are discussed in this section. Front Panel Turned ON when internal Turned ON when internal temperature exceeds 45°C. temperature exceeds 55°C. Grounding Terminal When connecting this unit to any other component, make sure that it is properly grounded by connecting this terminal to an appropriate point. - Page 9 (NVS-40) or a video switcher (SE-3200). RS-232/RS-422 Interface The RS-232/RS-422 port connects the HBT-50 directly to Datavideo’s camera controllers such as RMC-180, RMC-300A or RMC-300C. Use the RS-232 or RS-422 custom cable to connect. RS-232/RS-422 pinout for more information about the...
- Page 10 Use the DIP switch to select between RS-422 and RS-232 interfaces. Set bit 1 of the DIP switch to 0 to select RS-422 and 1 to select RS-232 then depending on the range of the connection, set bit 2 of the DIP switch to select the long reach (0) mode to enjoy longer cable reach of up to 120 meters.
-
Page 11: Rs-232/Rs-422 Pinout
3. RS-232/RS-422 Pinout The camera controller can be connected to the HBT-50 4 Channel HDBaseT Receiver through the RS- 232 or RS-422 interface using a custom Ethernet cable. The corresponding connection wiring schemes are shown below. RS-232 HBT-50 4 Channel HDBaseT Receiver Camera Controller White/Orange White/Orange... -
Page 12: Firmware Update
4. Firmware Update Datavideo usually releases new firmware containing new features or reported bug fixes from time to time. Customers can either download the firmware as they wish or contact their local dealer or reseller for assistance. This section outlines the firmware upgrade process which should take approximately few minutes to complete. -
Page 13: Frequently-Asked Questions
5. Frequently-Asked Questions This section describes problems that you may encounter while using HBT-50. If you have any questions, please refer to related sections and follow all suggested solutions. If problem still exists, please contact your distributor or the service center. Problems Solutions PTC-150T does not respond to the... -
Page 14: Dimensions
6. Dimensions HBT-50 All measurements in millimeters (mm) -
Page 15: Specifications
7. Specifications Product Name 4 Channel HDBaseT Receiver Model Number HBT-50 Video/Audio Input HDBaseT x 4 (with PoE and IEEE 802.3at) HDMI x 4 (up to 1080p50/59.94/60) Video Output SDI x 4 (up to 1080p50/59.94/60) 1080p60/59.94/50/30/29.97/25/24/23.98 Supported Video Format 1080i60/59.94/50 720p60/59.94/50 DVIP RJ-45 x 1 (Input) -
Page 16: Service And Support
Service and Support www.datavideo.com/product/HBT-50 Mar-28.2022 Datavideo Technologies Co., Ltd. All rights reserved 2020 Version E2...