Toshiba RAS-25N4KVRG-ND Service Manual page 53

POWER-SELECTION OPERATION
This function is used when the circuit breaker is shared with other electrical
appliances. It limits the maximum current and power consumption to 100%,
75%, or 50% and can be implemented by POWER-SELECTION. The lower
percentage, the higher saving and also longer compressor lifetime.
Note:
• Due to the reason that POWER-SELECTION function limits the maximum
current, inadequate cooling or heating capacity may occur.
1. Press MENU button for enter menu setting and press TEMP. button to select
ECO
MENU
°C
2. Enter POWER-SEL setting by press MENU button again.
MENU
°C
3. Select POWER-SEL level by press TEMP. button.
°C
100% 75%
4. Confirm POWER-SEL level by press MENU button.
MENU
°C
5. Leave from menu setting display by select EXIT.
MENU
°C
Blink only triangle
50%
6. MANUAL DEFORST OPERATION
To defrosting the heat exchanger of the outdoor unit during Heating operation
Press and hold
MENU
show as picture 1 for 2 seconds.
7. AIR FLOW DIRECTION
FIX
Press
1
louver in the desired vertical
direction.
FIX
Press
2
louver in the desired horizontal
direction.
SWING operation can be
selected from MENU button
MENU
Swing off
3
Note:
● Do not move the louver manually by hands or others.
● The louver may automation positioning by some operation mode.
- 53 -
: for 5 seconds , then remote control display will
1
: Move the
: Move the
● Vertical (Up-Down) swing
V
Vertical
(Up-Down)
Swing
● Horizontal (Left-Right) swing
Horizontal
H
(Left-Right)
Swing
V
Vertical and
H Horizontal
Swing
● HADA Care flow
HADA CARE
FLOW
H.DA