Toshiba RAS-25N4KVRG-ND Service Manual page 129

No. Part name
Side cabinet
5
Fan motor
6
Procedures
1. Side cabinet (right)
1) Perform step 1 in 2 and all the steps in 3.
2) Remove the fixing screw (ST2TØ4 × 10L
4 pcs.) used for securing the side cabinet
to the bottom plate and valve fixing panel
2. Side cabinet (left)
1) Perform step 1 in 2.
2) Remove the fixing screw (ST2TØ4 × 10L
1 pc.) used to secure the side cabinet (left)
onto the heat exchanger.
3)
Remove the fixing screw (ST2TØ4 × 10L
2 pcs.) used for securing the side cabinet to
the bottom plate and heat exchanger.
Detail A
1) Perform work of item 1 of 1 and 2.
2) Remove the flange nut fixing the fan motor a
the propeller.
• Flange nut is loosened by turning clockwise.
(To tighten the flange nut, tur
counterclockwise.)
3) Remove the propeller fan.
4) Disconnect the connector for fan motor from
the inverter.
5) Remove the fixing screws 3 pcs.) holding by
hands so that the fan motor does not fall.
* Precautions when assembling the fan motor
Tighten the flange nut using a tightenin
torque of 4.9 N•m.
Detail B
Propeller fan
- 129 -
Remarks
Hook the claw noto
the bottom plate
The back body section hooked
onto the bottom plate here.
Detail C
Fan motor
Flange nut