Steps
1. Align the rib inside the left hinge cap to the outer sides.
2. Push the left hinge cap down until it clicks in place.
3. Align the rib inside the right hinge cap to the outer sides.
4. Push the right hinge cap down until it clicks in place.
Next steps
1. Install the
display
assembly.
2. Install the
wireless
card.
3. Install the
base
cover.
4. Install the
SD
card.
5. Follow the procedure in
Display bezel
Removing the display bezel
Prerequisites
NOTE:
This procedure is applicable for systems with plastic chassis.
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the
wireless
card.
5. Remove the
display
assembly.
6. Remove the
hinge
caps.
About this task
The following images indicate the location of the display bezel and provide a visual representation of the removal procedure.
64
Removing and installing components
After working inside your
Before working inside your
computer.
computer.